Problem

refrakt reference card prints, today:

Universal attributes (available on every rune): tint, tint-mode, bg, width, reading, dropcap, spacing, inset, elevation, prominence, reveal, stagger, frame, …

On a card, reading, dropcap and prominence do nothing. The CLI states as a fact something false about the rune it is describing. The language server's completeAttributeNames has the same blind spot: it iterates the rune's Markdoc schema attributes with no applicability filter, so the editor autocompletes prominence on runes where the engine will drop it with a warning.

Both are correct from where they stand — schemas are theme-agnostic and applicability currently lives in ThemeConfig.runes, which neither loads.

WORK-527 made the scale visible for the first time: 686 per-rune unavailability entries across 132 runes. 111 runes can never carry data-reading; 92 can never carry data-prominence.

Four of the seven gated axes warn when they are dropped. Three — reading, content-place and the cover scrim* family — are entirely silent.

Goals

• A rune's Markdoc schema offers only the universal attributes that can affect it.
• refrakt reference, editor completion and Markdoc validation become correct without loading theme config.
• Applicability cannot be changed by a theme.
• Universal-attribute availability is answered by a declared rule, not by which schema constructor a rune happened to use.
• Every inapplicable attribute an author writes produces feedback — no silent no-ops.
• Applicability gates are declared capabilities, not structural facts reused as proxies. See The governing rule below.

Non-goals

• Letting a theme suppress attribute emission. Explicitly rejected in ADR-028.
• Restricting what a theme may do with layout, structure, styles, contentWrapper, staticModifiers, autoLabel, editHints or projection.
• Migrating the six hand-written schemas to createContentModelSchema. See Phase 3.
• Changing any HTML the engine emits. This spec is about what authors may write and what tools promise; transform output is unchanged throughout.

Phases

The ordering is load-bearing: the data audit must land before schemas narrow, or wrong exclusions get frozen into validation errors.

Phase 1 — Audit and correct the section-role data

Applicability is derived from sections, and sections is currently both incomplete and, in places, over-declared. The audit runs in both directions — a role that is missing wrongly denies an attribute, and a role that is present wrongly offers one. Both become hard facts once schemas narrow, so both are worth settling first.

Direction 1 — roles that are missing

Six runes declare a body slot in their layout but never map it to the body role: Card, BentoCell, Character, Realm, Faction, Playlist.

Card is the clearest case. Its config is:

sections: { media: 'media' },
layout: { root: ['media', 'content'],
          content: { tag: 'div', children: ['eyebrow', 'body', 'footer'] } }

The content model is literally "body (optional, repeatable any block)" — body text is the main thing a card contains. sections simply never declares it, so applyBemClasses never sets data-section="body", so data-reading never lands. That is a config gap, not a statement that cards have no body.

Six more declare a title/header slot with no header-ish role: AccordionItem, BentoCell, CharacterSection, RealmSection, FactionSection, ItineraryDay.

The remaining 105 runes have neither a body role nor a body slot and are genuinely bodyless (badges, icons, table cells) — those exclusions are correct and must not be "fixed".

Each of the ~10 runes needs a per-rune judgement: is the missing role an oversight, or is the slot deliberately not a semantic section? Adding a role is not output-neutral — it adds data-section and enables data-reading — so each change needs its own justification and test.

Direction 2 — roles doing double duty

Three runes map a body role from a slot not named body:

Under Phase 3 the latter two would have reading and dropcap offered in their schemas, so {% datatable reading="prose" dropcap=true %} would validate and stamp a drop cap onto a table.

The role is not the problem, and removing it is not the fix. DataTable's table genuinely is the rune's main content region, and Lumina styles that role directly — styles/dimensions/sections.css:42 and styles/dimensions/density.css:45 both key on [data-section="body"]. Dropping the role would change how these runes render, for a reason unrelated to rendering.

The real problem is that body carries two meanings that were merged by accident of timing:

• Structural — "the rune's main content region". Its original purpose, consumed by the dimension stylesheets.
• Editorial — "prose that a reading register applies to". Added later by SPEC-108, which reused the existing structural declaration as a proxy for a capability it never declared.

The proxy holds for most of the 21 runes with a body role and breaks for a real minority: DataTable, Showcase, Form, Api, Symbol. (Only four runes set defaultReading at all — Sidenote, PullQuote, TextBlock, Lore.)

Separating the two meanings is therefore not a data fix and does not belong in Phase 1. It is a small design change, and it is sequenced into Phase 4 for a reason given there.

Guard against recurrence

A lint or test that flags a missing role (Direction 1) belongs here, so that drift cannot silently return once corrected. Direction 2 is not a lint target — those roles are correct.

The governing rule: declare capabilities, do not infer them

The lesson generalises past reading, and is worth stating because it predicts where the next axis will go wrong. All four applicability gates today:

The one exact gate is the one whose declaration was made for that purpose. Every proxy gate reuses a structural fact declared for something else, and the lossy one is where the correlation breaks.

Rule. When an axis needs a capability, have runes declare that capability. Infer it from an existing structural fact only when the fact and the capability are genuinely the same thing. A media role really is a frame target — that inference is identity. A body role merely usually contains prose — that is correlation, and correlation drifts.

Applied at SPEC-108 time this would have caught the reading case. It is the test to apply to the next universal axis anyone adds. If a second axis turns out to need it, this rule is a candidate for promotion to its own ADR.

Phase 2 — Lock applicability as rune identity

Extend the IDENTITY_FIELDS guard in packages/transform/src/validate.ts — today enforced only against SPEC-091 variant deltas — to the theme override path in mergeRuneConfig. block, modifiers and sections become non-overridable on every merge path.

This is expected to be a no-op in practice (Lumina overrides none of them), which makes it cheap to land early and independently.

Where the applicability data lives — resolved as (b)

Phase 3 needs the gating facts reachable from schema-build time, and today they live in RuneConfig, which the schema layer never sees. createContentModelSchema merges all ~37 universal attributes unconditionally, at module scope, with no structural input at all:

// packages/runes/src/lib/index.ts:384
Object.assign(attributes, universalAttributes);

Two shapes were considered. The module graph decides between them.

(a) Keep RuneConfig as the source and have the schema layer consume it — rejected. The dependency direction is config → tags, uniformly. Core's config.ts imports four sentinels from tag modules (BREADCRUMB_AUTO_SENTINEL, NAV_AUTO_SENTINEL, PAGINATION_AUTO_SENTINEL, XREF_RUNE_MARKER); no core tag imports config, and no plugin tag imports its config either — 0 of 9.

For a tag module to import config would invert that direction and create a cycle in core. Because createContentModelSchema is called at module scope, the tag would observe coreConfig still uninitialised mid-cycle — a crash, not a subtle bug. The cycle-free variant (narrow later, at catalog/registry assembly) works but must run at every assembly point — the core catalog, each plugin's runes record, the merged tag set — and hands config to every consumer. That is the "teach the consumers to read config" model ADR-028 already rejected, reached by a different route.

(b) Declare the fact in the tag module and let config reference it — adopted.

// tags/card.ts
export const cardSections = { media: 'media', body: 'body' } as const;
export const card = createContentModelSchema({ …, sections: cardSections });

// config.ts — already imports from tags/
Card: { block: 'card', sections: cardSections, … }

• createContentModelSchema has the fact in hand at construction, so narrowing is local: no config lookup, no cycle, no build-order question.
• The engine is unchanged — it still reads config.sections exactly as today.
• No new import direction anywhere. Core already runs this way; plugins would start to, in the direction their code already permits.

Narrowing becomes correct by construction rather than by ordering discipline, which is the whole reason to prefer it over the workable form of (a).

Scope of the move. The join tables plus frameTarget: sections (~50 runes), mediaSlots (a handful), frameTarget (2). Mechanical, but it touches ~50 places across ten packages.

modifiers does not move. For the gates that read it, the schema already knows: cover and content-place gate on the rune declaring a media-position / content-place modifier, and those are author-facing attributes the schema declares anyway (refrakt reference card lists both). That is the exact gate from The governing rule above, and it is already schema-side.

The identity guard remains load-bearing. Under (b), config references the rune's declaration rather than owning it — but sections is still a RuneConfig field, so a theme could shadow it in the merged config. The engine would then use the theme's value while the schema used the rune's: silent divergence, exactly what this spec closes. The guard is required under every option, not just under (a).

The line to draw: join tables vs postures

The question is not "does sections move" but which fields are schema↔engine join tables and which are genuine theme postures. sections turns out to be the clearest case of the former:

Accordion: { sections: { preamble: 'preamble', headline: 'title', blurb: 'description' } }

• Keys are the rune's own slot names, emitted as data-name by its schema transform. A theme cannot invent one — it does not control what the transform emits.
• Values are a closed vocabulary the engine owns (header | preamble | title | description | body | footer | media, types.ts:341).

The theme owns neither side. All a theme can do is rewire an existing pair — exactly the capability ADR-028 removes.

Its only emission consumer is applyBemClasses (engine.ts:560), which turns the role into data-section, plus data-reading/data-dropcap on a body role and data-guest-fit on a media role. Lumina's CSS reads the emitted data-section attribute, never the sections config (styles/dimensions/sections.css and ~10 rune stylesheets), so moving the field touches no stylesheet at all. The theme's real relationship to sections is entirely downstream of emission: it styles roles, it does not define them.

Applying the same test to the fields that travel with it:

substrateTarget gates nothing

It defaults to 'self', so substrate is applicable on every rune, and it is set on zero runes in the catalog. The only unavailability path — substrateTarget: 'media' on a rune with no media section — is a misconfiguration, not an authored intent, and cannot currently occur. It is a genuine theme posture ("put the pattern on the media well rather than the whole surface") and can stay in RuneConfig without splitting anything. This spec's earlier framing of it as a fuzzy applicability gate was wrong.

frameTarget splits frame applicability across two homes

Frame applicability resolves as config.frameTarget ?? (hasMediaSection(config.sections) ? 'media' : null). The type has no 'none', so frameTarget can only ever grant, never revoke.

It is set on exactly two runes — Figure and Showcase, both 'self', both with no media section. In both cases it grants frame applicability to a rune that would otherwise have none, and it means "frame me, because I am the media" — which reads as a structural fact about the rune, not a decoration.

That creates a concrete hazard if sections moves and frameTarget does not. Frame applicability would have two sources, one of them still theme-overridable, so a theme could add frameTarget: 'self' to a rune whose narrowed schema rejects frame=. Config would grant what the schema forbids — the same divergence this spec exists to close, inverted.

Three resolutions, to be decided in the placement work item:

• (a) frameTarget moves with sections. Both become rune identity. Cheapest and most consistent; the migration is two runes.
• (b) Narrow frameTarget so it can only redirect among surfaces the rune already has. Then Figure/Showcase would need a media section to be framed — awkward, since the whole rune is the media.
• (c) Introduce an explicit "this rune is its own media surface" structural fact and retire frameTarget: 'self'. The most honest modelling; the most churn.

(a) is the decision. (c) is recorded below as a follow-on with an explicit trigger, because the evidence for it today is thin and (a) does not foreclose it.

Why (c) is deferred rather than rejected

The engine has one media model, and it assumes media is a sub-zone holding a guest: sections: { x: 'media' } declares the well, guestFit says how the well contains its guest, mediaSlots sizes it, findMediaZone() walks children for data-section="media", and frameTarget defaults to 'media' when such a zone exists.

Figure and Showcase do not host media — the image is the figure. There is no guest. That fact has no representation in config: the only way to express it is a side effect of frameTarget: 'self', which states the consequence ("frame chrome lands on my root") rather than the cause ("I am the media surface").

(c) would name the cause — e.g. mediaSurface: 'self', mutually exclusive with a media section role — so that every media-aware axis derives from one fact: chrome lands on the media surface, which is either the root or [data-section="media"].

The argument for it is that substrateTarget is already the second instance of the same escape hatch — same 'media' | 'self' type, same question, added independently, and it too never learned about these two runes. Today {% figure substrate="dots" substrate-target="media" %} warns "has no media section" and does nothing, on a rune that plainly has a media surface.

The argument against is that this is two runes and two axes, one of which is set on zero runes in the catalog. That is a duplicated pattern, not a demonstrated cost, and (c) carries a new config field, a vocabulary, its interaction with sections, both facets' resolution logic, docs, contract description and tests.

Trigger for revisiting: if a third media-aware axis needs a 'self' target, stop adding escape hatches and name the fact. Until then (a) holds, and the migration (c) would need is the same two runes either way.

Phase 3 — Narrow schemas and fix the consumers

With correct data and a reachable source, createContentModelSchema merges only the applicable universal attributes.

The rule must be declared, not inherited from a constructor. Six runes use hand-written schemas and therefore carry no universal attributes at all: icon, tint, bg, xref, expand, badge. That split is mostly principled and should be expressed rather than migrated away:

So the rule needs at least three inputs: inline-ness, configurator-ness, and rune-structural applicability. Migrating these six to createContentModelSchema is not required — four would end up declaring "no universal attributes" anyway.

Consumers then fall out:

• refrakt reference stops printing "available on every rune" and reports the rune's actual set. No config loading.
• Language server completion narrows automatically — it reads rune.attributes, which is the schema.
• reading, content-place and cover scrim* gain the dev warning their four siblings already have, for the case where an attribute is written but the facet never runs. Still needed: schema narrowing catches authored attributes, not values arriving through scoped defaults or embed overrides (ADR-027).

Phase 4 — Separate the prose capability from the body role

Give reading and dropcap a declared gate instead of the lossy body-role proxy, per the governing rule above. The structural role and every stylesheet that keys on it are untouched.

Sequenced after Phase 3, deliberately. The design question is the default, and Phase 3 settles it:

• Default-on (a body role implies prose unless a rune opts out) keeps the migration tiny, but preserves the lossy proxy as the default — so the DataTable bug simply recurs for the next non-prose rune.
• Default-off (a rune must declare that it bears prose) is honest, but a forgotten declaration silently disables reading — which is today's failure mode returning.

Default-off is the right answer only once schemas have narrowed: with Phase 3 in place, a forgotten declaration is no longer silent — the attribute is not offered, and refrakt reference says so. Phase 3 converts the risk of default-off from an invisible regression into a discoverable one. Running Phase 4 first would forfeit that.

Shape. Express the gate as a capability declared by the facet and provided by the rune, rather than another hard-coded helper alongside hasBodySection / hasMediaSection / hasPageSectionHeader:

readingAxis.requires = 'prose'
TextBlock: { provides: ['prose'] }

Only one axis needs it initially, so this is close to the narrow fix in cost. It is worth doing as the general shape now because SPEC-124 already gave every facet a declaration point — requires sits beside contract and describeForRune, and flows into the structure contract for free. The alternative, a bespoke proseSection field on RuneConfig, solves the same case and leaves the next axis to invent its own.

The ~21 runes carrying a body role are audited once for whether they bear authored prose. Expected non-providers: DataTable, Showcase, Form, Api, Symbol.

Migration

Narrowing turns {% card reading="prose" %} from a silent no-op into a Markdoc validation error. That is the intended outcome — the author gets no feedback at all today — but it will break existing content.

Phase 1 removes most of the sting: the runes an author is most likely to have written reading on are exactly the six whose roles were missing. What remains is content targeting a genuinely bodyless rune, where the error is correct.

The transitional option from ADR-028's rejected alternatives is available if the break proves too sharp: keep schemas permissive for one minor and have refrakt reference and the editor annotate inapplicable attributes rather than reject them, narrowing in the following minor.

Decided: narrow directly, no transitional minor

Phase 1 has landed, so the impact is now measured rather than estimated. Every {% tag %} in the repo's markdown — 986 files across site/content, plan, the plugins and the create-refrakt templates — was scanned for the seven gated axes and each use attributed to the rune it sits on, then checked against the structure contract's unavailable map:

• 25 uses in live authored content. 0 would be rejected after narrowing.
• 5 would be rejected, all inside documentation code fences — illustrative examples, not content that builds.

The transitional minor exists to soften a break that does not materialise here, and it carries a real cost: it preserves the silent no-op as the default experience for another release, which is the thing this spec exists to remove. Narrow directly in Phase 3.

Two caveats the same scan turned up, both now fixed rather than migrated:

• Three docs taught {% recipe reading="prose" %} as the "editorial-header composition" — the flagship example of this spec and SPEC-108. recipe has no body slot at all (its content is ingredients, steps and tips), so reading was always a no-op there and the composition only ever half-worked. The user docs now use blog, which maps content → body and carries the whole composition; SPEC-108 carries a correction note rather than a rewrite.
• site/content/runes/bg.md documented {% bg src="…" scrim="bottom" %}, but bg is a hand-written schema that declares no scrim attribute, so that example was already a Markdoc attribute-undefined error with the scrim silently never applying. The scrim* family is universal and belongs on the rune the background sits behind; the doc now shows that form.

Neither is a migration concern — both were broken before narrowing. They are recorded here because the impact scan is what surfaced them, and because they are the same disease this spec treats: documentation promising an attribute the schema does not carry.

Acceptance criteria

• The ~10 missing-role mismatches are individually assessed and resolved; each change carries its own test and the reasoning is recorded
• A lint or test flags a missing section role, so Direction 1 drift cannot recur
• reading and dropcap gate on a declared prose capability, not on the body role; the structural role and every stylesheet keying on [data-section="body"] are unchanged
• The capability is declared by the facet and provided by the rune, so the next axis needing one does not invent a bespoke field
• The ~21 body-role runes are audited for whether they bear authored prose; DataTable, Showcase, Form, Api and Symbol no longer offer reading/dropcap
• IDENTITY_FIELDS is enforced on mergeRuneConfig, not only on variant deltas
• The join tables (sections, mediaSlots) and frameTarget are declared in their tag modules and referenced from config, so createContentModelSchema has them at construction; the engine's read path is unchanged
• modifiers stays in RuneConfig — the schema already declares the attributes its gates read
• frameTarget moves with sections (resolution (a)), so frame applicability has a single source — no path by which theme config can grant an attribute the narrowed schema rejects
• createContentModelSchema merges only applicable universal attributes
• Universal-attribute availability is governed by a declared rule that accounts for inline-ness and configurator runes — not by which constructor a schema used
• refrakt reference <rune> reports the rune's actual universal attributes and no longer claims "available on every rune"
• Language server completion offers only applicable universal attributes, with no theme-config loading added to the completion path
• reading, content-place and the cover scrim* family warn when dropped
• The structure contract's unavailable entries agree with the narrowed schemas — the two derivations must not diverge
• Transform output is unchanged except where Phase 1 deliberately adds a section role; those changes are enumerated
• Migration path decided and documented; a breaking change carries a changeset
• npm run build, the full repo suite, and refrakt contracts --check pass

References

• ADR-028 — the governing decision
• SPEC-091 — engine config variants; source of the identity-field rule
• SPEC-124 — facet registry; gave each axis an exported vocabulary
• WORK-527 — universal axes in structure contracts; the measurement
• SPEC-108 — reading register and dropcap
• SPEC-107 — elevation and prominence
• ADR-027 — scoped attribute bags; the non-authored input path
• SPEC-028 — rune output standards